Digital television transmitter

sudo apt-get enhance && sudo apt-get install rpi-update && sudo rpi-update && sudo apt-get install apt-transport-https && sudo apt-get install git && git clone && cd rpidatv/src && make -j 4 sudo make install

rpidatv -1.3.0 Consumption: rpidatv -i File Input -s Symbolrate -c Fec [-o OutputMode] [-f frequency production] [-l] [-p energy] [-h] -i way to Transport File Input -s SymbolRate in KS (125-4000) -c Fec : 1/2 or 3/4 or 5/6 or 7/8 -m OutputMode {RF(Modulate QSK in RF need -f option to set frequency)} {IQ(Output QPSK I/Q} {PARALLEL(Output parallel (DTX1, MINIMOD..)} {IQWITHCLK(Output I/Q with CLK (F5LGJ)} {DIGITHIN (Output I/Q for Digithin)} -f Frequency to output in RF Mode in MHZ -l loop file input -p Power on output 1..7 -x GPIO Pin output for I or RF {12, 18, 40} -y GPIO Pin output for Q {13, 19, 41, 45} -h assistance (print this help).

Sample : sudo ./rpidatv -i test.ts -s 250 -c 1/2 -m RF -f 437.5 -l

Minimal visual selection

It is possible to introduce a visual selection based in /scripts folder